Regency FireGenie Manuel d'utilisateur télécharger pdf (Page 10)

FPI FireGenie

Remote Control Manual10

Time Zone 1 On-Time

Programming of Time Zone 1

SETTING THE PROGRAM MODE

The user can program two On-Times and two Off-Times as well as the Temperature settings for each

day of the week. The PROG button is used to initiate the programming mode. The “+” and “-” buttons

are used to adjust the time and temperature settings.

Note: The Remote Control must be “ON” in order to set the Programs.

To change or re-program your Remote Control, conﬁ rm that the Remote Control is in program mode.

“PROG” will be displayed on the LCD. Hold the “PROG” button down for 2 seconds, you will see

“PROG” and the Time both ﬂ ash. Continue through the set-up instructions.

Follow the steps below to set the programs:

1) Programming the On-Time of Time Period 1

Press and hold the PROG button for 2 seconds or more to initiate the Programming mode.

The symbol “PROG 1” will ﬂ ash to indicate the Remote is in Programming mode.

The On-Time for Time Period 1 will also ﬂ ash. The “+” and “-” buttons can be used to adjust

this time setting.

The LCD will show the current setting in Time Period 1 for Monday:

Programming of Time Period 1

Time Period 1 On-Time

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Regency FireGenie Manuel d'utilisateur Page 10